1/2" ROH, 6.6° Bite Angle Model 1000

00001

1/2" ROH, 6.6° Bite Angle Model 1000 00001
The Blade Barber Model 1000 is a completely new type of skate sharpener for any ice skate blade requiring a hollow sharpening. The Blade barber applies is 1/2" Radius of Hollow which is the standard for 3mm thick player ice skates (not 4mm thick goalie skates).
CDN$49.95 In stock
WARNING:****THE BLADE BARBER CAN SHARPEN SKATES WITH 3/8" OF BLADE HEIGHT OR MORE. IF YOUR SKATES HAVE LESS THAN 3/8" OF BLADE HEIGHT. YOU CAN'T USE THE BLADE BARBER. GET NEW BLADES FOR YOUR SKATES!****
1/2" ROH, 6.6° Bite Angle Model 1000 1/2" ROH, 6.6° Bite Angle Model 1000 1/2" ROH, 6.6° Bite Angle Model 1000

    I have been using the 1/2" ROH for about a month now. It works great. Its really hard to get skates sharpened in Wellington New Zealand. We have to ship our blades to Auckland. Now I can do them anytime. The only problem is that my mates keep wanting to use it. I suspect Blade Barber will have quite a following from down here! Keep up the great work.

    thumb David Sie
    3/17/2019

    My son and I have been using this device for a few months now and I really like how it works and the sharpen that you get from it. It did take a few times to feel comfortable using it. My son keeps it in his hockey bag and has used it a couple of times now when he has lost an edge on his skates. He really likes it. Great tool for a quick fix.

    thumb Rene Doyle
    9/26/2018

    I have used the Blade Barber three times and I am very impressed with it. I have worked in the ice rink business for seven years and I have sharpened hundreds of skates using both Black Stone and Blade Master sharpeners. I will say the Blade Barber is a very nice tool for the recreational skater/hockey player. It is somewhat harder to get the smaller blemish out of the skate’s steel with the Blade Barber as it will not take off as much steel as a machine sharpening would. However, Blade Barber mentions this in the Q&A section of its webpage. The Blade Barber seams to produce very even skate blades. Uneven skate blades can be very dangerous to skate on, and I have not found this to be an issue with the Blade Barber. One draw back to the Blade Barber is that the life of the sharpening doesn’t seam to last as long as a machine sharpening. I do not skate on very hard ice and my Blade Barber sharpening typical last 3-4 hours of skating time before I feel the need to get my edges tuned up again. With a machine sharpening I can generally skate on them for 5-6 hours of ice time. However this could vary for everyone depending on how much cutting/ stoping you are doing when skating, ice surface temperature, humid vs no humid rinks, indoor vs pond ice, ext, ext. Overall this is a great product for the price! I would recommend also using a piece of steel wool or a skate stone on the blades after using the Blade Barber, it will save your fingers some agitation from the fine bits of steel that is shaved off when sharpening your skates. The steel wool will also prevent rusty skate blades if you plan to store your skates for a extended period of time. The Blade Barber will save you a lot of time waiting in rink lines and or picking up and dropping off your skates to be sharpened. Thanks Blade Barber for a very inventive and ground breaking tool in the skating industry!

    thumb Nathan Minckler
    3/20/2019